Sensor heads [Class 1 type]
| Model No. |
IEC standards
comforming type |
ANR1150 |
ANR1151 |
ANR1182 |
ANR1115 |
FDA regulations
comforming type |
ANR11501 |
ANR11511 |
ANR11821 |
ANR11151 |
| Measurement center distance |
50 mm
1.969 in |
50 mm
1.969 in |
80 mm
3.150 in |
130 mm
5.118 in |
| Measuring range |
±10 mm
±0.394 in |
±10 mm
±0.394 in |
±20 mm
±0.787 in |
±50 mm
±1.969 in |
| Light source |
Laser diode (Peak emission wavelength: 650 nm 0.026 mil) |
| |
Pulse width / Max.output /
Laser class |
15 μs (Duty 50 %) / 0.4 mW (Peak value) / Class 1 (IEC 60825-1), (Class II for FDA regulations conforming type) |
Beam spot diameter
(Representative values from a measurement center distance) |
0.6 x 1.1 mm
0.024 x 0.043 in
approx. |
0.09 x 0.05 mm
0.004 x 0.002 in
approx. |
0.7 x 1.2 mm
0.028 x 0.047 in
approx. |
0.7 x 1.4 mm
0.028 x 0.055 in
approx. |
Resolution
(2 σ) |
10Hz |
5 μm
0.197 mil |
5 μm
0.197 mil |
20 μm
0.787 mil |
100 μm
03.937 mil |
| 100Hz |
16 μm
0.630 mil |
16 μm
0.630 mil |
65 μm
2.559 mil |
330 μm
12.992 mil |
| 1kHz |
50 μm
1.969 mil |
50 μm
1.969 mil |
200 μm
7.874 mil |
1 mm
00.039 in |
| Linearity error (Note 2) |
Within ±0.2 % of F.S. |
Protection
(excluding connector) |
IP67 (IEC) |
Ambient illuminance
(Incandescent lamp) |
2,500 lx or less |
| Weight (including cable) |
Net weight: 300 g approx. |
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
2) White ceramics is the target of this value.
Class 2 type
| Model No. |
IEC standards
comforming type |
ANR1250 |
ANR1251 |
ANR1282 |
ANR1215 |
ANR1226 |
FDA regulations
comforming type |
ANR12501 |
ANR12511 |
ANR12821 |
ANR12151 |
ANR12261 |
| Measurement center distance |
50 mm
1.969 in |
50 mm
1.969 in |
80 mm
3.150 in |
130 mm
5.118 in |
250 mm
9.843 in |
| Measuring range |
±10 mm
±0.394 in |
±10 mm
±0.394 in |
±20 mm
±0.787 in |
±50 mm
±1.969 in |
±150 mm
±5.906 in |
| Light source |
Laser diode (Peak emission wavelength: 650 nm 0.026 mil) |
| |
Pulse width / Max.output /
Laser class |
15 μs (Duty 50 %) / 1.6 mW (Peak value)
/ Class 2 (IEC 60825-1), (Class II for FDA regulations conforming type) |
Beam spot diameter
(Representative values from a measurement center distance) |
0.6 x 1.1 mm
0.024 x 0.043 in
approx. |
0.09 x 0.05 mm
0.004 x 0.002 in
approx. |
0.7 x 1.2 mm
0.028 x 0.047 in
approx. |
0.7 x 1.4 mm
0.028 x 0.055 in
approx. |
0.8 x 1.5 mm
0.031 x 0.059 in
approx. |
| Resolution (2 σ) |
10Hz |
1 μm
0.039 mil |
1 μm
0.039 mil |
4 μm
0.157 mil |
20 μm
0.787 mil |
150 μm
5.906 mil |
| 100Hz |
3.5 μm
0.138 mil |
3.5 μm
0.138 mil |
13 μm
0.512 mil |
65 μm
2.551 mil |
500 μm
19.685 mil |
| 1kHz |
10 μm
0.394 mil |
10 μm
0.394 mil |
40 μm
1.575 mil |
200 μm
7.874 mil |
1.5 mm
0.059 in |
| Linearity error (Note 2) |
Within ±0.2 % of F.S. |
Within ±0.4 % of F.S. |
Protection
(excluding connector) |
IP67 (IEC) |
Ambient illuminance
(Incandescent lamp) |
3,000 lx or less |
2,500 lx or less |
| Weight |
Net weight: Sensor head (including cable): 240 g approx., Intermediate cable: 130 g approx. |
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
2) White ceramics is the target of this value.
Controllers
| Model No. |
ANR5131 |
ANR5141 |
ANR5231 |
ANR5241 |
| Comparative output type |
Single comparator |
Window comparator |
| Analog output |
±5 V/F.S.
(2 mA max.) |
4 to 20 mA/F.S. (250 Ω max.) |
±5 V/F.S.
(2 mA max.) |
4 to 20 mA/F.S. (250 Ω max.) |
| Output impedance |
50 Ω |
- |
50 Ω |
- |
| Zero-point adjustment |
Within ±10 % of F.S. |
Temperature drift
(Sensor and controller set) |
Within ±(0.03 % of F.S.) /℃ |
Within ±(0.04 % of F.S.) /℃ |
Within ±(0.03 % of F.S.) /℃ |
Within ±(0.04 % of F.S.) /℃ |
Response frequency (-3 dB)
Response time
(10 to 90 %) |
1 kHz 0.4 ms/ 100 Hz 4 ms/ 10 Hz 40 ms (Switchable) |
Comparative output
(Note 2) |
NPN open-collector 2 Nos.
(100 mA, 30 V DC or less, residual voltage 1.5 V or less) |
NPN open-collector 3 Nos.
(100 mA, 30 V DC or less, residual voltage 1.5 V or less) |
| |
Hysteresis |
0.15 % of F.S. or less |
| Alarm output |
NPN open-collector 1 No. (100 mA, 30 V DC or less, residual voltage 1.5 V or less) (Note 2) |
| Intensity monitor output |
±5 V |
| Comparative timing Input |
No voltage input (when earthing, no comparative output allowed) |
MEASUREMENT
SENSORS
MEASUREMENT
Displacement display |
Sensor head: Measuring range display LED (RANGE) |
Sensor head: Measuring range display LED (RANGE)
Controller: LCD 3 digit display |
| Gain selection |
AUTO / LOW (switchable) |
Mutual interference
prevention
(Note 3) |
Between 2 sets |
| Operating voltage range |
12 to 24 V DC +10 /-15 % including ripple 0.5 V (P-P) |
Current consumption
(Sensor and controller set) |
250 mA or less (at 12 V DC), 125 mA or less (at 24 V DC) |
Weight
(including cable) |
Net weight: 180 g approx. |
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉ .
2) PNP output type is also available.
3) The value of the linearity characteristics, resolution and response time might get worse.
Common
| Insulation resistance (Initial) |
Between external DC input and sensor metal parts (except for connector metal parts) 20 MΩ or more (at 500 V DC megger) |
| Voltage withstandability (Initial) |
Between external DC input and sensor metal parts (except for connector metal parts) AC 500 V 1 min. |
Vibration resistance
(Screw installation) |
10 to 55 Hz (1 cycle/min.) double amplitude of 1.5 mm 0.059 in (controller: 0.75 mm 0.030 in), in X, Y and Z directions for two hours each |
Shock resistance
(Screw installation) |
20 G or more, in X, Y and Z directions for three times each |
| Ambient temperature |
0 to +50 ℃ +32 to +122 ℉,
Storage: -20 to +70 ℃ -4 to +158 ℉ |
| Ambient humidity |
35 % to 85 % RH (No dew condensation) |
Note:
If there is no descript-xion for measurement conditions, the test is performed under operating voltage 24 V DC, ambient temperature +20° C +68 ℉, gain AUTO, response frequency 10 Hz, interference prevention OFF and white ceramics as a target at a measurement center distance.
