로그인 회원가입

 

 광-디스플레이측정기 | 소음진동측정기 | 현미경내시경 | 레이저측정기| 산업용영상 기타부품 문의

   

 

 

 

     

   CONTEC 자동화용 디지털 입출력 보드 PIO-32/32L PCI
  글쓴이 : 툴마켓      날짜 : 07-10-17 11:36      조회 : 4561     
   http://www.foreruntech.com/product/product_detail.php?pi=107&c=12&p=3 (572)
   http://www.contec.com/vidaq/ (1010)

CONTEC의 산업자동화용 디지털 입출력 보드 PIO-32/32L PCI
 
 
  
 
제품명 : PIO-32/32L(PCI)H
64Ch Opto-isolated Digital I/O Board, PCI-bus
Inputs channels : 32ch, Output channels : 32ch
Response time : 200 μsec
Output rated current : 100mA Max
I/O address : Any 32-byte boundary
External power : DC+12 - 24V (±15%)
Power consumption : DC+5V 250mA (Max)
 
 
 
    
 
 
 
[Features]
  • In order for 16-point unit to carry out common composition, it can common every respond to a different external power supply.
  • Since the PCI bus (personal computer) and the I/O interface are insulated by the photo-coupler, it excels in noise-proof nature.
  • 32 points of an input signal can be used as an interruption input.
    Moreover, the edge of the input signal which generates interruption can also be chosen.
  • It has the digital filter function for preventing the incorrect input by the noise or the chattering.
  • The rating of an output signal is a maximum of 35VDC and 100mA per point.
  • Zener diode is connected to the output transistor for protection from serge voltage. Moreover, the over-current protection element is attached per eight output transistors.
  • PIO-32/32L(PCI)H, and PIO-32/32L(PCI) are connector pin compatibles.


[Specifications]
<Board outside size



[Support Software]
<Attached support software
  • API Function Library  API-PAC(W32)
    It is the library software which offers the command to the hardware of our company in standard Win32API function (DLL) form for Windows.
    By the various programming languages which are supporting Win32API functions, such as Visual Basic, and Visual C/C++, the high-speed application software which harnessed the special feature of the hardware of our company can be created.
    Moreover, it can use also for the check of hardware of operation by the installed diagnostic program.
    For details, please refer to Help or the homepage of our company in appending CD-ROM.

    Main correspondence OS Windows 2000, NT, Me, 98, etc
    Main adaptation languages  Visual C++, Borland C++, Visual Basic, etc.
    Others The hard disk which has 20MB empty domain for every library software is required.
    The newest driver and download service (http://www.contec.co.jp/apipac/) of difference file are also offered.
    <Optional Support Software
    Collection for measurement systems development of ActiveX components
  • ACX-PAC(W32)BP
    It is the convenient measurement systems development tool for Windows in which the collection of examples which can be used immediately, and the collection (collection of software parts) of components which can program easily only by combining were mentioned.
    Component for control of the input-and-output board (card) of our company is made the one package. Analog I/O, digital I/O, control of each interface of GPIB communication and X-Y graph display, and file preservation are possible.
    Collection for measurement systems development of ActiveX components
  • ACX-PAC(W32)AP
    In addition to the function of ACX-PAC(W32)BP, components, such as display systems, such as various graph, switch, and lamp, and operation / analysis, serve as a package.
    <Gratis download service
    The general-purpose I/O function library for Linux
  • IO-LIB(LNX)
    It is the library software for controlling the input-and-output board (card) of our company by Linux (I/O access).
    It can download and receive from the homepage of our company.
    An I/O Port map required for control (I/O access), configuration register information, etc. can come to hand from the homepage of our company.


  • [Accessory]
    <Accessories (option)
    Solderless relay terminal unit                    : EPD-96  *1
    Lead terminal unit                                    : DTP-64(PC)  *1
    Signal monitor accessories for digital I/O            : CM-64(PC)E  *1
    Solderless relay terminal unit                    : EPD-37  *2
    Signal monitor accessories for digital I/O            : CM-32(PC)E  *2
    96pin half -> 37pin D-SUB(female) x2 conversion terminal : CCB-96  *3
    *1 Option cable PCB96P or PCB96PS is required separately.
    *2 Option cable PCB96W or PCB96WS is required separately.
    *3 Option cable PCB96P or PCB96PS, and the cable for 37pin D-SUB are required separately.


    [Cable/Connectoer]
    <Cable (option)
    Shield cable with a both-ends connector for 96pin half pitch connector    : PCB96PS-* (1.5m, 3m, 5m)
    Flat cable with a both-ends connector for 96pin half pitch connector    : PCB96P-*  (1.5m, 3m, 5m)
    Shield cable with an one end connector for 96pin half pitch connector    : PCA96PS-* (1.5m, 3m, 5m)
    Flat cable with an one end connector for 96pin half pitch connector    : PCA96P-*  (1.5m, 3m, 5m)
    Distribution shield cable for 96pin half pitch connector(96P -> 37P~2) : PCB96WS-* (1.5m, 3m, 5m)
    Distribution flat cable for 96pin half pitch connector(96P -> 37P~2) : PCB96W-*  (1.5m, 3m, 5m)
    <Connector (option)
    96pin half pitch (female) connector Five-piece set : CN5-H96F


    [Packing List]
  • Board [PIO-32/32L(PCI)H]  - 1
  • Descript-xion - 1
  • CD-ROM [API-PAC(W32)] - 1
  • Registration card & guarantee - 1
  • Envelope for registration card return - 1


  • [Connection method on board]
    8Connection method with a connector
    Connection between this board and external apparatus is made by the interface connector on board.
    8Connector Signal Arrangement




    [Connection of input signal]
    It connects with the apparatus in which current drives, such as a switch and apparatus of transistor output, are possible.
    External power supply for supplying current is also required for connection.
    The state of ON/OFF of the apparatus in which a current drive is possible is inputted as a digital value.
    8Input circuit

    Input circuit of the interface part of PIO-32/32L(PCI)H is as the above figure.
    Signal input part is Opto-isolated input (current sink output correspondence). Therefore, in order to drive the input part of this board, external power supply The power supply capacity which is needed at this time is about 5.1mA per input (the time of 12VDC about 2.6mA) at the time of 24VDC.
    8The example of connection with switch



    [Connection of output signal]
    It connects with the apparatus controlled by current drives, such as control, LED, etc. of a relay.
    External power supply for supplying current is also required for connection.
    ON/OFF of the apparatus controlled by current drive is controlled by the digital value.
    8Output circuit

    Output circuit of the interface part of PIO-32/32L(PCI)H is as the above figure. Signal output part is Opto-isolated open collector output (current sink type), and in order to drive output part, external power supply is required for it. The rating of output current is a maximum of 100mA per point.
    Since the low saturation transistor is used for output, it is connectable also with TTL level input. The remains voltage between collector emitter at the time of Output ON (LOW level voltage) is less than 1.0V at less than 50mA of output current in less than 0.5V and less than 100mA of output current.
    Zener diode is connected to the output transistor for protection from serge voltage. Moreover, the poly switch for over-current protection is attached per eight output transistors. If this function works, the output part of a board will be in the state which cannot be operated temporarily. In this case, please use it by turning ON power supply again after turning OFF a personal computer and external power supply and waiting for them for several minutes.
    6Note
    All outputs are turned off at the time of power supply injection.
    8The example of connection with LED
    8The example of connection of TTL level input



    [Connection method of sink type output and input]
    The example of connection of a sink type output (output board) and a sink output correspondence input (input board) is shown below. When you connect with boards, please make this example of connection reference.



    [Block Diagram]
     
     
     
    VI Library of data acquisition for LabVIEW
    VI-DAQ
    What is VI-DAQ?
    VI-DAQ is VI library for using our abundant products, analog input and output, digital input and output, and a counter input device ( PCI bus / PC card / USB module). It is for LabVIEW of National Instruments. Various devices can be used easily, without carrying out a complicated setup, since it is created with the function form similar to the "data acquisition VI" of LabVIEW.
    It can download from HERE.
    The main features
    <An intelligible interface
    VI-DAQ is created with the function form similar to the "data acquisition VI" of LabVIEW. Since a complicated setup like driver form is unnecessary, the system which used device of our company can create for a short period of time.
    <Offer VI function according to the use and the stage.
    The function used well is offered for Foundations VI, a special condition setup and etc. as extension VI. The proper use according to the use and the stage is possible for understanding how using by Foundations VI first, and adding Extension VI after that if needed etc.
    <Offer the practical sample according to the use
    It is preparing many samples of simple and intelligible useing VI.
    For example, in the analog input, "an easy input", "use of a trigger", and "a continuation sampling." are prepared. The system development which used VI-DAQ, such as changing only a required configuration and checking actual operation, is supported powerfully.
    <The library independent of hardware
    In case using different devices, such as a PCI bus board / PC card / USB module, it can be used by the same VI.
    <Works at English environment
    VI library / help / sample are prepared for English environment.
    Composition of VI-DAQ
    • It can be used only by installing VI-DAQ and a required device driver. Moreover, it can use a new device by upgrade of a driver also.
    • VI Runtime contained in VI-DAQ absorbs the difference in the device to be used. A PCI bus board and a USB module can create a program using the same VI, without being conscious of the difference, although the device drivers of each hardware differ.
    Operating environment
    <Correspondence OS
    Microsoft Windows XP
    Microsoft Windows 2000
    Microsoft Windows Me
    Microsoft Windows 98 and Second Edition
    <LabVIEW correspondence version
    National Instruments LabVIEW 6i
    National Instruments LabVIEW 6.1
    National Instruments LabVIEW 7.0
    National Instruments LabVIEW 7.1
    Correspondence device (as of September, 2005)
    It is possible to use products(it will put on the market in September, 2005 and later too.) by installing the newest driver appended in hardware or downloaded.
    ( Functions may be unable to be used when it is the device which the specification of API differs)
    <Analog I/O device
    PCI Bus Exprees Board
    AIO-163202F-PE
    PCI Bus Board
    ADA16-32/2(PCI)F *1, ADA16-8/2(LPCI)L *1, AD16-16(LPCI)L *1, DA16-4(LPCI)L *1,
    DA-16-4(LPCI) *1
    AD12-16(PCI)EV, AD16-16(PCI)EV, AD12-16U(PCI)EV, AD16-16U(PCI)EV,
    AD12-16(PCI)E, AD12-16U(PCI)E, AD12-16U(PCI)EH, AD16-16(PCI)E, AD16-16U(PCI)EH,
    ADI12-16(PCI), AD12-16(PCI), AD12-64(PCI), ADI16-4C(PCI), ADI16-4L(PCI),
    ADAI16-8/2(LPCI)L, ADI16-16(LPCI)L,
    DA16-8(LPCI)L, DA16-16(LPCI)L, DA12-4(PCI), DA12-8(PCI), DA12-16(PCI), DAI16-4C(PCI), DAI16-4(LPCI)L
    PC-Card
    ADA16-32/2(CB)F *1, ADA16-8/2(CB)L *1, AD12-8(PM)
    USB Module
    AI-1608AY-USB, ADI12-8(USB)GY, ADI16-4(USB), DAI12-4(USB)GY, DAI16-4(USB)
    <Digital I/O device
    PCI Exprees Bus Board
    DIO-1616T-LPE, DIO-1616L-PE, DIO-3232L-PE, DIO-48D-LPE
    PCI Bus Board
    PI-32L(PCI), PI-32L(PCI)H, PI-32B(PCI), PI-32B(PCI)H,
    PI-64L(PCI), PI-64L(PCI)H, PI-128L(PCI), PI-128L(PCI)H,
    PO-32L(PCI), PO-32L(PCI)H, PO-32B(PCI), PO-32B(PCI)H,
    PO-64L(PCI), PO-64L(PCI)H, PO-128L(PCI), PO-128L(PCI)H,
    PIO-16/16L(PCI), PIO-16/16L(PCI)H, PIO-16/16T(PCI), PIO-16/16TB(PCI),
    PIO-16/16B(PCI), PIO-16/16B(PCI)H, PIO-32/32B(PCI)H, PIO-32/32B(PCI)V, PIO-32/32L(PCI), PIO-32/32L(PCI)H,
    PIO-32/32T(PCI), PIO-32/32T(PCI)H, PIO-32/32F(PCI), PIO-64/64L(PCI), PIO-16/16L(LPCI)H, PIO-16/16B(LPCI)H,
    PIO-16/16T(LPCI)H, PIO-16/16H(PCI)H, PIO-32/32H(PCI)H, PIO-16/16RL(PCI)H, PIO-32/32RL(PCI)H,
    PIO-16/16RY(PCI), PIO-48D(PCI), PIO-48D(LPCI)H, PIO-64/64L(PCI)H,
    RRY-16C(PCI), RRY-16C(PCI)H, RRY-32(PCI), RRY-32(PCI)H
    PC-Card
    PIO-16/16L(CB)H, PIO-48D(CB)H, PIO-24W(PM), PIO-32D(PM), PIO-16/16L(PM)
    USB Module
    DIO-0808LY-USB, DIO-24DY-USB, DI-16(USB)GY, DI-32(USB), DO-16(USB)GY, DO-32(USB),
    DIO-8/8(USB)GY, DIO-16/16(USB)
    CompactPCI Bus Board
    PI-64L(CPCI), PO-64L(CPCI), PIO-32/32L(CPCI)
    <Counter input device
    PCI Bus Board
    CNT24-4(PCI), CNT24-4(PCI)H, CNT24-4D(PCI), CNT24-4D(PCI)H
    USB Module
    CNT24-2(USB)GY
    *1: The in range out range function and event controllership function of the counter ability of F series, bus master transmission (an analog input, output), and an analog input are not supported. The counter ability of L series is not supporting. The synchronization with a board cannot be performed except that ADA16-32/2(PCI)F used the synchronous connector.
    *About our GPIB communication device, please use API-GPLV(W32) GPIB Driver for LabVIEW
    with the GPIB device library of LabVIEW without modification.
     
    실사진입니다.
     

    물품번호    
    62 SICK LMS-200 2D 레이저 스케너    
    61 키엔스 XG-7000 고기능 비전센서    
    60 OMRON 고정도 레이저 변위센서 Z4M-W40RA 수량2대    
    59 LS-3000 고정밀도 비접촉 레이저 외경 측정기 32Ø    
    58 MVS-320 비접촉 레이저 변위-진동 측정기 0.01mm    
    57 LJ-3000 2D 이차원 비접촉 레이저 표면 형상 측정기    
    56 KEYENCE LE-4000 비접촉 레이저 표면 형상 측정기    
    55 LS-5000 고정밀도 비접촉 레이저 외경 측정기 62~120Ø    
    54 CV-2000 , OP-42342 이미지 분석기 비전카메라    
    53 [공지] NEC INT-5000 초장거리 3차원 레이저 측정기    
    52 CONTEC 자동화용 디지털 입출력 보드 PIO-32/32L PCI    
    51 NEC Danae-R 3D 3차원 스케너 + 래피드폼 소프트웨어 세트    
    50 키엔스 2차원 자동 치수 측정기 VM-8040 비디오미터    
    49 로렌드 3D Modeling Machine LPX-250 3차원 LASER 3D 스케너    
    48 시그마 3차원 측정 소프트 COMS EMS98AD-3D    
    47 키엔스 고속 레이저 변위계 LC-2400 정밀도 0.02 μm    
    46 Panasonic LM-10 정밀 레이저 변위계    
    45 CCD 0.003mm 레이저 측정기 LK-080 , LK-2100 변위계셋    
    44 LT-900 시리즈 2차원 레이저 측정 변위계    
    43 LX2-100 MS2-H50 레이저 라인에리어 측정기    
    42 VG-300 외경측정기 VG-035 레이저 라인 게이지 - 32Ø    
    41 CV-120 이미지 분석기 비전카메라    
    40 키엔스 2D 에리어 레이저 스캐너    
    39 미쓰도요 LSM-500 레이저 외경 측정기 2Ø    
    38 OPTO CONTROL 2600 정밀 레이저 외경측정기 34Ø    
    37 오므론 레이저 변위계 3Z4M - 고장품    
    36 샤프 IV-S20 이미지 분석기 비전카메라    
    35 항공기, 선박등 대형 정밀 구조물용 3차원 측정기    
    34 LT-8000 시리즈 2차원 레이저 측정 변위계    
    33 NAIS LASER DISPLACEMENT SENSOR 레이저 변위계    
    32 [!] 라이카 HDS3000 레이저 대형 3D 스케너    
    31 CV-300 이미지분석 시스템 비전카메라    
    30 MINOLTA VIVID 700 미놀타 3차원 3D 스케너    
    29 LX2-03 레이저 비접촉 변위 측정기    
    28 비전시스템 CV-100 이미지 분석기    
    27 MINOLTA VIVID 9i 미놀타 3차원 3D 스케너    
    26 키엔스 레이저 변위계 LB-040 LB-1000 정밀도 2μm    
    25 FU-L50Z 비접촉 광섬유 측정센서 5세트    
    24 [판매용] KEYENCE LS-7600 레이저 외경 측정기 62Ø    
    23 안리츠 KL350A KL151A 미세-고속 레이저 외경 측정기 2Ø    
    22 MINOLTA VIVID 300 미놀타 3차원 3D 스케너    
    21 키엔스 장초점 레이저 변위계 LK-500    
    20 파나소닉 SUNX 초고속 레이저 변위계 HL-C1C    
    19 ZYGO MESA 레이저 간섭계    
    18 Steinbichle C100VZ 3차원 3D 스케너    
    17 미쓰도요 LSM-3000 레이저 외경 측정기 ( LSM-310S ) 10Ø    
    16 오므론 ZG2 단면 형상 측정 레이저 변위계    
    15 안리츠 KL3300A laser displacement sensor    
    14 Mark-202 고정밀 2축 스테이지 콘트롤러 stage controller    
    13 ZYGO PTI250 RS 렌즈용 레이저 간섭계    
     1  2