●SHOT-202AM(은)는, 계측이나 기기 제어등에 적절했다AC서보 드라이버 내장형의 범용2축콘트롤러입니다.종래품과의 호환성을 유지하면서, 모든 분야에 대응 가능한 범용성과 저가격을 실현했습니다.

●시판의 PC와RS232C,GP-IB또는,USBinterface를 개입시켜 접속해, PC로부터 단순한 명령을 보내는 것으로 스테이지를 정확하게 목표 위치에 이동시킬 수 있습니다.또 프로그램 데이터의 다운로드나 업 로드에 의해, 내부 데이터의 보존이 가능합니다.프로그램이 간소화되고 있기 때문에, 복잡한 제어 시스템을 간단하게 구축할 수 있습니다.

●I/O(입출력) 신호나 방아쇠 출력 신호 및DC24V의 전원 출력(브레이크용 전원)을 내장하고 있기 때문에 외부 입출력 기기의 제어나 외부 측정기에 동기 한 방아쇠 신호를 출력할 수 있습니다.

●MARK-202AM의 후계 기종이 됩니다.MARK-202AM(와)과는 호환성이 있기 때문에, 종래의 제어계에 그대로 사용해 주실 수 있습니다.(다만,RS232C연결기를D-sub9핀오스로부터D-sub9핀메스로 변경하고 있기 때문에,RS232C그리고 사용하시는 경우는RS232C/STR케이블을 사용해 주십시오.)

일반 사양

성능 사양

드라이버부

●샘플 프로그램
HP보다 이하의 샘플 프로그램을 다운로드할 수 있습니다.
·SG Commander(WINDOWS95/98/Me/2000/XP대응)
·LabVIEW

Mark-202
High-performance, multi-function, programmable two-axis stage controller
With two new internal high-performance drivers 
Stepping motor drivers

 The Mark-202 is a general-purpose two-axis stage controller with internal drivers suited to measurement and device control applications. Compatible with existing models, this controller offers excellent applicability across a wide range of requirements at a low cost.

When the Mark-202 is connected to an ordinary personal computer via an RS232C, GP-IB or USB interface, the stage can be accurately moved to the desired position by simple commands sent from the PC. Also, it is possible to save internal data via program data downloads and uploads. The program has been simplified for ease of construction of complicated control systems.

Internal power supply for I/O (Input/Output) signals, trigger output signals, and DC 24V output signals makes it possible to control external input or output devices or to output trigger signals synchronized with external measuring devices. A joy pad (control pad) is required for manual operation, memory settings, and programming. (A joy pad/control pad is included with Kantan Measuring Series software; separate purchase is not required.)

General Specifications

OptoSigma P/N:

555-1202

Model:

Mark-202

Power supply:

AC85V~264V +/- 10% 50/60Hz

Power consumption:

150VA

Operating temperature:

5~40°C

Storage temperature:

-20~70°C

Ambient humidity:

20~80%RH (non-condensing)

External dimensions:

270W x 295D x 120H(excluding attachments)

Weight:

5Kg

Performance Specifications

OptoSigma P/N:

555-1202

No. of control axes:

Two

Coordinate indication range:

999999999 pulses

Minimum operating pulse rate:

1pps

Maximum operating pulse rate:

500kpps

Acceleration/Deceleration time:

0 to 1000ms

Sensor inputs:

Mechanical origin sensor/proximity sensor/CW(+) limit/CCW(-) limit (Input logic is switchable by memory switch)

Trigger outputs:

Open collector output (max. DC 24V 30mA)

Interfaces:

RS232C interface (9-pin male)

GP-IB interface:
      Setting address: 0 to 30
      Delimiters: CR, LF CR+LF, EOI

DC outputs:

DC 24V 6.3A (non-insulated): motor driver operation, external I/O power supply terminal output (such as motor brake); DC12V 0.2A (non-insulated): sensor power supply; DC 5V 1.0A (non-insulated): CPU logic circuitry, driver interface

Inputs/Outputs:

Input signals x 4 (photo coupler input internal resistance 2.2 kW); Output signals x 4 (open collector output max. DC 24V 100mA)

Control signals:

Input signals x 14 (photo coupler input internal resistance 2.2kW);
Program number x 1, Drive command x 1,
Return to mechanical origin command x 2,
Temporary stop command x 1, Emergency stop command x 1, Forward travel command x 2, Reverse travel command x 2, Speed setting x 2.
1, 2/3, 4 switch x 1 (for Mark-204)
Output signals x 5 (open collector output max. DC 24V 20mA)
Start/stop x 1, Return to mechanical origin/stop x 2,
BUSY x 1

Driver Specifications

OptoSigma P/N:

555-1202

Drive method:

Bipolar pentagon micro-step

Drive current (output current):

0.5A to 1.6A per phase

Current down (stop current):

27% to 90% of designated output current

Motor excitation:

Motor excitation set to ON/OFF via input signal

Micro-step setting:

1, 2, 4, 5, 8, 10, 16, 20, 40, 80 micro-steps
(Switchable between M1 with the micro-step setting switch)

Setting switches:

Switches x 3: RUN, STOP, M1

Insulation resistance:

Greater than 100MW when measured between the power supply terminal and the case at DC 500V MW at room temperature and humidity

Insulation voltage resistance:

No abnormality when AC 1500V is applied at 60Hz for one minute between the power supply terminal and the case at room temperature and humidity

Power supply line noise:

Normal operation under conditions of 800V 1mS in common mode and normal mode

Static noise:

Normal operation under conditions of 200pF,  kW 10kV