CONTECÀÇ »ê¾÷ÀÚµ¿È¿ë µðÁöÅÐ ÀÔÃâ·Â º¸µå PIO-32/32L PCI
|
|
[Features] |
|
- In order for 16-point unit to carry out common composition, it can common every respond to a different external power supply.
- Since the PCI bus (personal computer) and the I/O interface are insulated by the photo-coupler, it excels in noise-proof nature.
- 32 points of an input signal can be used as an interruption input.
Moreover, the edge of the input signal which generates interruption can also be chosen.
- It has the digital filter function for preventing the incorrect input by the noise or the chattering.
- The rating of an output signal is a maximum of 35VDC and 100mA per point.
- Zener diode is connected to the output transistor for protection from serge voltage. Moreover, the over-current protection element is attached per eight output transistors.
- PIO-32/32L(PCI)H, and PIO-32/32L(PCI) are connector pin compatibles.
|
|
|
[Specifications] |
|
<Board outside size |
|
|
[Support Software] |
|
<Attached support software
API Function Library API-PAC(W32) It is the library software which offers the command to the hardware of our company in standard Win32API function (DLL) form for Windows. By the various programming languages which are supporting Win32API functions, such as Visual Basic, and Visual C/C++, the high-speed application software which harnessed the special feature of the hardware of our company can be created. Moreover, it can use also for the check of hardware of operation by the installed diagnostic program. For details, please refer to Help or the homepage of our company in appending CD-ROM.
Main correspondence OS Windows 2000, NT, Me, 98, etc Main adaptation languages Visual C++, Borland C++, Visual Basic, etc. Others The hard disk which has 20MB empty domain for every library software is required.
The newest driver and download service (http://www.contec.co.jp/apipac/) of difference file are also offered.
<Optional Support Software Collection for measurement systems development of ActiveX components
ACX-PAC(W32)BP It is the convenient measurement systems development tool for Windows in which the collection of examples which can be used immediately, and the collection (collection of software parts) of components which can program easily only by combining were mentioned. Component for control of the input-and-output board (card) of our company is made the one package. Analog I/O, digital I/O, control of each interface of GPIB communication and X-Y graph display, and file preservation are possible.
Collection for measurement systems development of ActiveX components
ACX-PAC(W32)AP In addition to the function of ACX-PAC(W32)BP, components, such as display systems, such as various graph, switch, and lamp, and operation / analysis, serve as a package.
<Gratis download service The general-purpose I/O function library for Linux
IO-LIB(LNX) It is the library software for controlling the input-and-output board (card) of our company by Linux (I/O access). It can download and receive from the homepage of our company. An I/O Port map required for control (I/O access), configuration register information, etc. can come to hand from the homepage of our company.
|
|
|
[Accessory] |
|
<Accessories (option) Solderless relay terminal unit : EPD-96 *1 Lead terminal unit : DTP-64(PC) *1 Signal monitor accessories for digital I/O : CM-64(PC)E *1 Solderless relay terminal unit : EPD-37 *2 Signal monitor accessories for digital I/O : CM-32(PC)E *2 96pin half -> 37pin D-SUB(female) x2 conversion terminal : CCB-96 *3 *1 Option cable PCB96P or PCB96PS is required separately. *2 Option cable PCB96W or PCB96WS is required separately. *3 Option cable PCB96P or PCB96PS, and the cable for 37pin D-SUB are required separately.
|
|
|
[Cable/Connectoer] |
|
<Cable (option) Shield cable with a both-ends connector for 96pin half pitch connector : PCB96PS-* (1.5m, 3m, 5m) Flat cable with a both-ends connector for 96pin half pitch connector : PCB96P-* (1.5m, 3m, 5m) Shield cable with an one end connector for 96pin half pitch connector : PCA96PS-* (1.5m, 3m, 5m) Flat cable with an one end connector for 96pin half pitch connector : PCA96P-* (1.5m, 3m, 5m) Distribution shield cable for 96pin half pitch connector(96P -> 37P~2) : PCB96WS-* (1.5m, 3m, 5m) Distribution flat cable for 96pin half pitch connector(96P -> 37P~2) : PCB96W-* (1.5m, 3m, 5m) <Connector (option) 96pin half pitch (female) connector Five-piece set : CN5-H96F
|
|
|
[Packing List] |
|
Board [PIO-32/32L(PCI)H] - 1
Descript-xion - 1
CD-ROM [API-PAC(W32)] - 1
Registration card & guarantee - 1
Envelope for registration card return - 1
|
|
|
[Connection method on board] |
|
8Connection method with a connector Connection between this board and external apparatus is made by the interface connector on board.
8Connector Signal Arrangement |
|
|
[Connection of input signal] |
|
It connects with the apparatus in which current drives, such as a switch and apparatus of transistor output, are possible. External power supply for supplying current is also required for connection. The state of ON/OFF of the apparatus in which a current drive is possible is inputted as a digital value. 8Input circuit
Input circuit of the interface part of PIO-32/32L(PCI)H is as the above figure. Signal input part is Opto-isolated input (current sink output correspondence). Therefore, in order to drive the input part of this board, external power supply The power supply capacity which is needed at this time is about 5.1mA per input (the time of 12VDC about 2.6mA) at the time of 24VDC.
8The example of connection with switch |
|
|
[Connection of output signal] |
|
It connects with the apparatus controlled by current drives, such as control, LED, etc. of a relay. External power supply for supplying current is also required for connection. ON/OFF of the apparatus controlled by current drive is controlled by the digital value. 8Output circuit
Output circuit of the interface part of PIO-32/32L(PCI)H is as the above figure. Signal output part is Opto-isolated open collector output (current sink type), and in order to drive output part, external power supply is required for it. The rating of output current is a maximum of 100mA per point. Since the low saturation transistor is used for output, it is connectable also with TTL level input. The remains voltage between collector emitter at the time of Output ON (LOW level voltage) is less than 1.0V at less than 50mA of output current in less than 0.5V and less than 100mA of output current. Zener diode is connected to the output transistor for protection from serge voltage. Moreover, the poly switch for over-current protection is attached per eight output transistors. If this function works, the output part of a board will be in the state which cannot be operated temporarily. In this case, please use it by turning ON power supply again after turning OFF a personal computer and external power supply and waiting for them for several minutes. 6Note All outputs are turned off at the time of power supply injection.
8The example of connection with LED
8The example of connection of TTL level input |
|
|
[Connection method of sink type output and input] |
|
The example of connection of a sink type output (output board) and a sink output correspondence input (input board) is shown below. When you connect with boards, please make this example of connection reference.
|
|
|
[Block Diagram] |
|
VI Library of data acquisition for LabVIEW VI-DAQ |
|
|
What is VI-DAQ?
VI-DAQ is VI library for using our abundant products, analog input and output, digital input and output, and a counter input device ( PCI bus / PC card / USB module). It is for LabVIEW of National Instruments. Various devices can be used easily, without carrying out a complicated setup, since it is created with the function form similar to the "data acquisition VI" of LabVIEW.
It can download from HERE. |
The main features |
- <An intelligible interface
- VI-DAQ is created with the function form similar to the "data acquisition VI" of LabVIEW. Since a complicated setup like driver form is unnecessary, the system which used device of our company can create for a short period of time.
- <Offer VI function according to the use and the stage.
- The function used well is offered for Foundations VI, a special condition setup and etc. as extension VI. The proper use according to the use and the stage is possible for understanding how using by Foundations VI first, and adding Extension VI after that if needed etc.
- <Offer the practical sample according to the use
- It is preparing many samples of simple and intelligible useing VI.
For example, in the analog input, "an easy input", "use of a trigger", and "a continuation sampling." are prepared. The system development which used VI-DAQ, such as changing only a required configuration and checking actual operation, is supported powerfully.
- <The library independent of hardware
- In case using different devices, such as a PCI bus board / PC card / USB module, it can be used by the same VI.
- <Works at English environment
- VI library / help / sample are prepared for English environment.
|
Composition of VI-DAQ |
- It can be used only by installing VI-DAQ and a required device driver. Moreover, it can use a new device by upgrade of a driver also.
- VI Runtime contained in VI-DAQ absorbs the difference in the device to be used. A PCI bus board and a USB module can create a program using the same VI, without being conscious of the difference, although the device drivers of each hardware differ.
|
|
Operating environment |
- <Correspondence OS
- Microsoft Windows XP
- Microsoft Windows 2000
- Microsoft Windows Me
- Microsoft Windows 98 and Second Edition
- <LabVIEW correspondence version
- National Instruments LabVIEW 6i
- National Instruments LabVIEW 6.1
- National Instruments LabVIEW 7.0
- National Instruments LabVIEW 7.1
|
Correspondence device (as of September, 2005) It is possible to use products(it will put on the market in September, 2005 and later too.) by installing the newest driver appended in hardware or downloaded. ( Functions may be unable to be used when it is the device which the specification of API differs) |
- <Analog I/O device
- PCI Bus Exprees Board
AIO-163202F-PE
- PCI Bus Board
ADA16-32/2(PCI)F *1, ADA16-8/2(LPCI)L *1, AD16-16(LPCI)L *1, DA16-4(LPCI)L *1, DA-16-4(LPCI) *1 AD12-16(PCI)EV, AD16-16(PCI)EV, AD12-16U(PCI)EV, AD16-16U(PCI)EV, AD12-16(PCI)E, AD12-16U(PCI)E, AD12-16U(PCI)EH, AD16-16(PCI)E, AD16-16U(PCI)EH, ADI12-16(PCI), AD12-16(PCI), AD12-64(PCI), ADI16-4C(PCI), ADI16-4L(PCI), ADAI16-8/2(LPCI)L, ADI16-16(LPCI)L, DA16-8(LPCI)L, DA16-16(LPCI)L, DA12-4(PCI), DA12-8(PCI), DA12-16(PCI), DAI16-4C(PCI), DAI16-4(LPCI)L
- PC-Card
ADA16-32/2(CB)F *1, ADA16-8/2(CB)L *1, AD12-8(PM)
- USB Module
AI-1608AY-USB, ADI12-8(USB)GY, ADI16-4(USB), DAI12-4(USB)GY, DAI16-4(USB)
- <Digital I/O device
- PCI Exprees Bus Board
DIO-1616T-LPE, DIO-1616L-PE, DIO-3232L-PE, DIO-48D-LPE
- PCI Bus Board
PI-32L(PCI), PI-32L(PCI)H, PI-32B(PCI), PI-32B(PCI)H, PI-64L(PCI), PI-64L(PCI)H, PI-128L(PCI), PI-128L(PCI)H, PO-32L(PCI), PO-32L(PCI)H, PO-32B(PCI), PO-32B(PCI)H, PO-64L(PCI), PO-64L(PCI)H, PO-128L(PCI), PO-128L(PCI)H, PIO-16/16L(PCI), PIO-16/16L(PCI)H, PIO-16/16T(PCI), PIO-16/16TB(PCI), PIO-16/16B(PCI), PIO-16/16B(PCI)H, PIO-32/32B(PCI)H, PIO-32/32B(PCI)V, PIO-32/32L(PCI), PIO-32/32L(PCI)H, PIO-32/32T(PCI), PIO-32/32T(PCI)H, PIO-32/32F(PCI), PIO-64/64L(PCI), PIO-16/16L(LPCI)H, PIO-16/16B(LPCI)H, PIO-16/16T(LPCI)H, PIO-16/16H(PCI)H, PIO-32/32H(PCI)H, PIO-16/16RL(PCI)H, PIO-32/32RL(PCI)H, PIO-16/16RY(PCI), PIO-48D(PCI), PIO-48D(LPCI)H, PIO-64/64L(PCI)H, RRY-16C(PCI), RRY-16C(PCI)H, RRY-32(PCI), RRY-32(PCI)H
- PC-Card
PIO-16/16L(CB)H, PIO-48D(CB)H, PIO-24W(PM), PIO-32D(PM), PIO-16/16L(PM)
- USB Module
DIO-0808LY-USB, DIO-24DY-USB, DI-16(USB)GY, DI-32(USB), DO-16(USB)GY, DO-32(USB), DIO-8/8(USB)GY, DIO-16/16(USB)
- CompactPCI Bus Board
PI-64L(CPCI), PO-64L(CPCI), PIO-32/32L(CPCI)
- <Counter input device
- PCI Bus Board
CNT24-4(PCI), CNT24-4(PCI)H, CNT24-4D(PCI), CNT24-4D(PCI)H
- USB Module
CNT24-2(USB)GY
- *1: The in range out range function and event controllership function of the counter ability of F series, bus master transmission (an analog input, output), and an analog input are not supported. The counter ability of L series is not supporting. The synchronization with a board cannot be performed except that ADA16-32/2(PCI)F used the synchronous connector.
- *About our GPIB communication device, please use API-GPLV(W32) GPIB Driver for LabVIEW
with the GPIB device library of LabVIEW without modification. |
½Ç»çÁøÀÔ´Ï´Ù.
|