Panasonic AJ-LT85 DVCPRO 휴대용 편집기 입니다.
AJ-LT85는 듀얼 데크에 듀얼 모니터를 장착한 편집스테이션입니다.
필드와 스튜디오에서 사용하도록 디자인되었고 15Kg 이하의 무게로
어디서든지 파워풀한 편집이 가능하도록 설계되었습니다.
|
Key Features
|
• |
DVCPRO Recording with Consumer DV Playback |
|
With many sophisticated editing functions, the deck is made for professional use under harsh field conditions. But the AJ-LT85 also plays back consumer DV recorded cassettes, large and small. The deck will only play back DV recorded in SP mode. |
| • |
Multi-Event Editing For Maximum Efficiency |
|
Operators will choose one of the decks as a player, the other as the recorder. The total unit makes insert and assemble editing fast and precise. The machine stores 100 events (in and out points) for tremendous assemble edit convenience. In insert edit mode, the video, two audio channels and time code channels can be selected independently. |
| • |
On-Screen Display of Edit Decision Lists |
|
During multi-event editing, the AJ-LT85 can display the EDL on the monitor for easy checking. The on-screen display also makes it easier to adjust many edit related settings. |
| • |
Powerful Audio Edit Modes |
|
In insert edit mode, you can add audio with the microphone input built into the AJ-LT85. Split edits where the video and audio tracks have been shifted can be done using either the video to the audio as the reference. Swap audio edits let you interchange and record two audio source channels. |
| • |
Time Code Reader with Tape Remaining Time Display |
|
Each side of the AJ-LT85 has its own SMPTE time code reader generator. Frame accurate edits are possible with precise time code in and out points. The machine also performs control track edits and the time code generator can be switched to display the tape remaining time. |
| • |
RS-422 Interface with Analog Component In and Out |
|
Each of the two VTRs built into the AJ-LT85 is equipped with composite video in and out, audio in and out, analog component output and an RS-422 machine control port. The AJ-LT85 is a full edit system that also provides camera recording and dubbing. If you connect another RS-422 deck to VTR1, the AJ-LT85 can control that outboard machine and edit video and audio to the VTR2 side. |
| • |
Time Code In and Out for Synchronized Production Systems |
|
The AJ-LT85 is equipped with time code ports in and out. This feature allows you to sync time code throughout multiple time code machines. | | |
|
Format |
DVCPRO |
|
Tape Speed |
33.820 mm / sec. |
|
Signal-to-Noise Ratio |
Not specified by manufacturer |
|
Maximum Record Time |
186 minutes with large cassette
66 minutes with small cassette |
|
|
|
Audio Section |
|
Dynamic Range |
Greater than 85 dB |
|
Audio Signal Format |
16-Bit / 48 kHz |
|
Frequency Response |
20Hz to 20kHz |
|
Signal to Noise Ratio |
20 dB Headroom |
|
|
|
Input / Output Connectors |
|
Signal Inputs |
Composite In- BNC (x 2)
S-Video- None
Reference/Sync- BNC (x 2)
Analog Audio Input- XLR (x 2)
Timecode In- BNC (x 1) |
|
Signal Outputs |
Composite Video Out- BNC (x 2)
Analog Component Out- 3-BNC (x 2)
Timecode Out- BNC (x 1)
Analog Audio Out- XLR (x 2)
Audio Monitor Out- XLR (x 1) |
|
Other Inputs/Outputs |
RS-422 In- 9-Pin (x 1)
RS-232C- 9-Pin (x 1)
Earphone- Stereo Mini (x 1) |
|
|
|
General Specifications |
|
Power Requirements |
120 Volts AC, 50 to 60 Hz |
|
Power Consumption |
95 Watts |
|
Operating Temperature |
41 to 104 degrees F
5 to 40 degrees C |
|
Dimensions (WxHxD) |
16 3/4 x 17 1/4 x 4 3/4 in.
424 x 435 x 210 mm |
|
Weight |
25.7 lbs.
11.7 kg |
|
Optional Accessories |
AJ-B75: AC Adaptor
QR-LT75: Anton Bauer Battery Mount
AJ-SC75: Carrying Case
AJ-CS750: Mini-DV Cassette Adaptor |
