Kett TN100 콘크리트 균열노화상태 측정진단용 산업용 내시경
건축물의 노화상태를 진단하기 위해 개발되어 외장재의 보수 및 개조를 위한 사전 검사에 적합.
본래의 벽에 지름10mm 정도의 구멍을 내어 벽뒤 방향의 내부를 관찰하기 위한 내시경.
Construction Concrete Checker
TN-100
|
| |
 |
 |
The TN-100 is a construction related concrete checker developed for use in diagnosing atrophying buildings using the Ministry of Construction's Architectural Research Office's Method, and is ideal for test repair work on the exterior of buildings. Previously, this unit was a gradation endoscope used for observing wall thickness and direction inside holes in buildings (roughly 10mm), but now you can use the unit to precisely find the floating state, finishing thickness, or neutralization depth of concrete. The test depth is 10mm, so with this unit you can even diagnose a structure that is badly damaged or almost destroyed or demolished. |
|
|
|
|
|
 |
| Specifications |
TN-100 |
|
| Total Length |
530mm |
|
| Head's Metal Fittings |
157mm |
|
| Exterior Diameter |
9.0mm |
|
| Permissible Bent Radius |
70mm |
|
| Focus Distance |
l-3mm |
|
| Number of Pixels (screen) |
10,000(individual pixel radius 18µm) |
|
| Bandle Radius |
ø1.8 |
|
| Observation Direction |
Peripheral |
|
| Angle |
About 35° |
|
| Greatest Measurement Depth |
100mm |
|
| Permissible Usage Temp |
-20-80°C |
|
| Lamp |
Small halogen lamp 5W (life of roughly 3000 hours) |
|
| Power Source |
Ni-cd x 4 or 1.5 ("C" size batteries) x 4 |
|
| Weight |
Roughly 0.4kg (battery batteries excluded) | | |
실사진입니다.
